do not scale from this print ru8-1xx-xx-xx-xx-dv-xx-x-xx no of positions -40, -50, & -60 row specification -dv: dual vertical signal routing -se: single ended -dp: differential pairs connector plating specification (values given are in micro-inches) -sm: selective, 30 au / 50 ni min on contact, matte tin tail -h: heavy gold, 30 au / 50 ni min on contact, 3 au / 50 ni min on tail -s: selective, 30 au / 50 ni min on contact, matte tin tail -l: light selective, 10 au / 50 ni min on contact, matte tin tail connector packaging -tr: tape & reel (leave blank for trays) stack height -19, -25, -30 (see table 1) option option -k: polyamide film pad (use k-dot-.217-.313-.005) -bl: board lock (fig. 2, sht. 2)(available on -25 & -30 stack heights only) "b" ref (see table 2) (see table 1) 'a' hsec8-1xx-01-xx-dv-a hsec8-1xx-01-xx-dv-a pcb-100256-ru8-xxx-xx-xx (see table 3) .276 7.000 ref .314 7.978 ref c fig. 1 ru8-160-19-se-xx-dv shown sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] material: .8mm board to board kit by: ru8-1xx-xx-xx-xx-dv-xx-x-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing els 8/17/04 2 1 sheet scale: 1:1 insulator: lcp, ul 94 vo, color: black contact: brush alloy, 390 ht latch arm: lcp f:\dwg\misc\mktg\ru8-1xx-xx-xx-xx-dv-xx-x-xx-mkt.slddrw notes: 1. represents a critical dimension. 2. both hsec8 connectors will be shipped with the same options except for -bl option. 3. reference hsec8 drawing for all other dimensions and options. 4. hsec8 assemblies will be tray packaged and hsc8 boards will be pacaged in bags. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 revision p
"b" ref (see table 2) "c" ref (see table 2) .487 12.38 ref 'a' (see table 1) hsec8-1xx-01-xx-dv-a hsec8-1xx-01-xx-dv-a-bl ltc-04 pcb-100256-ru8l-xxx-xx-xx (see table 3) ru8-160-25-se-xx-dv-bl shown (available in -25 & -30 stacker heights only) fig. 2 sheet of .8mm board to board kit by: ru8-1xx-xx-xx-xx-dv-xx-x-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing els 8/17/04 2 2 sheet scale: 2:1 revision p f:\dwg\misc\mktg\ru8-1xx-xx-xx-xx-dv-xx-x-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
|
